Yellow Travertine Flush Mount Ceiling Light With Scallop Edge
A yellow travertine flush mount ceiling light solves a specific problem: most flush mounts sit tight to the ceiling and disappear, which keeps the room tidy but leaves it flat, generic, and a little cold. This fixture takes the opposite route. It keeps the low, hardwired profile that works in rooms with standard ceiling heights, then uses genuine stone and a scalloped silhouette to give the ceiling something worth looking at.
It is built for people who are furnishing a bedroom, dining room, living room, or hospitality space and want warm, diffused light from a fixture that reads as architecture rather than hardware. The integrated LED module sits behind a white plastic diffuser, so you get an even glow instead of a visible bulb, and the 18.9-inch stone body gives the piece enough visual weight to anchor a room.
Design and Materials: Real Stone, Softened Profile
The body is cut from genuine yellow travertine — a natural stone with its own veining, pitting, and tonal drift. That means no two fixtures are identical. The veins run where the stone puts them, and the yellow reads slightly warmer or cooler from piece to piece. If you need four identical fixtures for a matched grid, stone is the wrong material. If you want each one to feel like an object, it is exactly right.
The scalloped edge is the design decision that does the most work. A plain stone disc would read heavy and a little severe at 18.9 inches across. The scallop breaks the perimeter into soft curves, so the fixture picks up classical references without tipping into ornate. It sits comfortably in contemporary and organic-modern rooms, and it does not fight minimalist furniture.
Finish is unfinished-in-spirit: the stone is cut and finished to show its natural surface rather than painted over, while the diffuser below is clean white plastic. That contrast — raw stone above, clean white light below — is what keeps the fixture from feeling like a period reproduction.
Light Quality: Integrated LED With Three Color Temperatures
The light source is an integrated LED module, not a replaceable bulb. That is a deliberate trade: you lose the ability to swap lamps, but you gain a fixture with no visible hardware, no bulb glare, and no mismatched shapes behind a diffuser. The trade-off to accept up front is that the LED is not user-replaceable — the listing states this plainly, so plan on the fixture being a long-term install rather than a serviceable one.
Color temperature is selectable at 3000K, 4000K, or 6000K. In practice:
- 3000K — warm and amber-leaning. Best for bedrooms, dining rooms, and evening living spaces where you want the stone to look golden.
- 4000K — neutral. The safe default for hallways, kitchens-adjacent spaces, and anywhere you need to see clearly without a cool cast.
- 6000K — cool and bright. Useful for retail, boutiques, and utility areas, though it will make yellow travertine look paler and more grey.
Control is through a standard wall switch, which is not included. The listing does not specify dimmer compatibility, so unless your electrician confirms otherwise, plan on switch-only operation rather than assuming it will dim.
Where It Works Best, Room by Room
At 18.9 inches in diameter and 4.7 inches deep, this is a medium-large flush mount. It has the presence for a primary room but is not so wide that it overwhelms a small one.
Bedroom
This is the most natural fit. Flush mounts are standard in bedrooms because pendants and chandeliers crowd the space and cast shadows at eye level. The stone adds texture without adding visual clutter, and 3000K keeps the room restful. Center it on the bed rather than the room's geometric center if the room is asymmetric — it will look intentional either way.
Dining Room
A flush mount over a dining table is an underrated choice. It throws even light across the whole table instead of pooling it in one spot, and it does not block sightlines across the table. The warm stone tone also flatters food and skin tones better than a cool white fixture.
Living Room and Hallway
In a living room it works as a layer rather than the main event — the ceiling anchor above a seating group, with lamps doing the mood work. In a hallway or entry it earns its keep because the scallop profile is visible from below at close range, which is exactly where hallways put your eyes.
Hospitality, Retail, and Trade Projects
The fixture is aimed at hotel rooms, lobbies, restaurants, and boutiques as much as homes. Stone reads as premium in commercial interiors, and the flush profile survives housekeeping and high-touch environments better than anything hanging. Designers and contractors can request volume pricing for multi-unit projects.
Sizing, Installation, and Electrical Notes
The fixture is hardwired and ceiling-mounted, so this is an electrician-or-confident-DIY job, not a plug-in. Three practical points before you buy:
- Ceiling height: at 4.7 inches deep, it clears standard 8-foot ceilings comfortably and leaves headroom in tighter rooms where a pendant would be a hazard.
- Voltage: rated AC 110-240V, so it works on North American 120V circuits and on 220-240V systems without a converter. Confirm your circuit and junction box capacity with your installer.
- Coverage: a 48cm / 18.9in diameter gives generous spread, but it is a single-point light. For rooms over roughly 200 square feet, pair it with wall or table lamps rather than expecting it to light the whole space alone.
Moisture rating is IP20 and damp-rated, so it is suitable for indoor use including bathrooms and covered outdoor areas — provided it is not directly exposed to water. Do not install it in a shower surround or an open porch where rain reaches it.
Specifications
| SKU | GHWC-L-00044667 |
| Brand | 1stlighting |
| Material | Yellow travertine, plastic diffuser |
| Light source | Integrated LED (not user-replaceable) |
| Color temperature | 3000K / 4000K / 6000K selectable |
| Voltage | AC 110-240V |
| Mounting | Ceiling, hardwired |
| Dimensions | Dia 48cm x H 12cm (Dia 18.9in x H 4.7in) |
| Body finish | Yellow travertine |
| Shade finish | White |
| Moisture resistance | IP20, damp-rated, indoor |
| Control | Compatible with wall switch (not included) |
| Certification | UL Certified, ETL Listed, CE Approved, RoHS Compliant, FCC Certified |
Is This the Right Flush Mount for Your Room?
Stone fixtures are not the right answer for every install. Use this checklist to decide quickly:
- Choose this fixture if you want a flush mount that is a visible design element, you are working with warm or natural materials (oak, linen, bouclé, terracotta), and you have a room where the ceiling is part of the composition.
- Choose this fixture if you need flexibility on color temperature — rental units, staging, or rooms that change function seasonally all benefit from 3000K/4000K/6000K selectability.
- Skip it if you need perfectly matched multiples. Natural travertine varies by piece, by design.
- Skip it if you want a replaceable bulb or a specific dimming protocol. The LED is sealed and the listing only specifies wall-switch control.
- Skip it if the room calls for cool, clinical white — the yellow stone will fight that palette.
Frequently Asked Questions
What is the scalloped frame made of?
Genuine yellow travertine, a natural stone with its own veining and texture. The integrated LED sits behind a white plastic diffuser, which is what produces the clean, even glow underneath.
How big is the fixture, and will it fit my ceiling?
It measures Dia 48cm x H 12cm (Dia 18.9in x H 4.7in). At 4.7 inches deep it is well within comfortable clearance for standard 8-foot ceilings. Dimensions are subject to minor manual measurement tolerance.
Can I choose the color temperature?
Yes — the fixture offers 3000K, 4000K, and 6000K. Note that color temperature can appear slightly different in person than on a monitor.
Is the LED replaceable?
No. The integrated LED module is designed for long-term performance and is not user-replaceable. For service questions, contact the brand directly.
Can it be used in a bathroom?
Yes, it is IP20 and damp-rated for indoor use, including bathrooms and covered outdoor areas. It should not be directly exposed to water, so avoid installing it inside a shower enclosure or where rain reaches it.
Does it work with a dimmer?
The fixture is controlled by a standard wall switch (not included). The specification does not list dimmer compatibility, so treat it as switch-controlled unless your electrician confirms otherwise for your specific setup.
Why This Fixture Holds Up Over Time
Two things tend to date a light fixture: a trendy silhouette and a finish that peels. This piece avoids both. The scallop is pulled from classical architecture rather than a seasonal trend cycle, and the surface is stone — there is nothing to peel. The electrical components are certified (UL, ETL, CE, RoHS, FCC), which matters for anyone installing multiple units in a rental, hotel, or commercial project where inspection is part of the process.
It also ages in a useful direction. Travertine develops character; it does not degrade into looking cheap. Five years from now the fixture will look like the room was built around it, which is the opposite of how most builder-grade flush mounts age.
If you want to see the full finish, the dimension details, or ask about expedited shipping and trade pricing, view the Yellow Travertine Scallop Edge Flush Mount Ceiling Light on 1stlighting. Sizing and layout questions are worth asking before you order — a 18.9-inch stone fixture is a real commitment to a room, and getting the placement right the first time is the whole game.
- Postado em:
- bedroom lighting
- dining room lighting
- flush mount ceiling light
- integrated LED ceiling light
- modern ceiling lamp
- scallop edge light
- travertine lighting










